WINDMILL SERVICES
Repair, rebuilds, and maintenance for farm and ranch windmills across eastern Kansas.
Windmill Services
Repair, rebuilds, and maintenance for farm and ranch windmills across eastern Kansas.
Keeping Kansas windmills running
A windmill is two systems in one — the mechanical head and tower above ground, and the well, pump cylinder, and sucker rod below. Problems can happen in either half. A seized gearbox is obvious — you can see the fan isn't turning. But a broken sucker rod or worn pump leathers downhole will stop your water just the same, even while the blades keep spinning.
We service both sides — the mechanical windmill components and the well infrastructure underneath. We also relocate windmills when a well has gone dry or is no longer usable, moving the full tower and head assembly to a new well site.
Keeping Kansas windmills running
A windmill is two systems in one — the mechanical head and tower above ground, and the well, pump cylinder, and sucker rod below. Problems can happen in either half. A seized gearbox is obvious — you can see the fan isn't turning. But a broken sucker rod or worn pump leathers downhole will stop your water just the same, even while the blades keep spinning.
We service both sides — the mechanical windmill components and the well infrastructure underneath. We also relocate windmills when a well has gone dry or is no longer usable, moving the full tower and head assembly to a new well site.
Warning Signs
Windmill isn't
pumping water
The fan turns but no water comes out. This usually means worn pump leathers, a broken sucker rod, or a stuck check valve downhole.
Grinding or squealing from the gearbox
Metal-on-metal noise means the gears or bearings are wearing out. Catching this early prevents a full gearbox rebuild.
Fan won't turn
in the wind
A seized gearbox, a stuck brake, or a tail vane issue can prevent the fan from engaging. If the blades aren't spinning on a windy day, something's locked up.
Leaking at the
base or pump head
Water dripping around the pump head or base of the tower often points to worn packing, a cracked cylinder, or a failing drop pipe connection.
Warning Signs
Windmill isn't
pumping water
The fan turns but no water comes out. This usually means worn pump leathers, a broken sucker rod, or a stuck check valve downhole.
Grinding or squealing from the gearbox
Metal-on-metal noise means the gears or bearings are wearing out. Catching this early prevents a full gearbox rebuild.
Fan won't turn
in the wind
A seized gearbox, a stuck brake, or a tail vane issue can prevent the fan from engaging. If the blades aren't spinning on a windy day, something's locked up.
Leaking at the
base or pump head
Water dripping around the pump head or base of the tower often points to worn packing, a cracked cylinder, or a failing drop pipe connection.
How we approach windmill repair
Every windmill job is different depending on the age of the unit, what's failed, and how accessible the location is. Here's the general process.
On-site evaluation — We assess the tower condition, gearbox, fan assembly, and downhole pump components to identify what's failed and what's close to failing. Most ranchers know something's wrong but aren't sure exactly what.
Gearbox and mechanical repair — Worn gears, bearings, and brake assemblies are repaired or replaced. On older mills, we can often rebuild the gearbox rather than replace the entire head, saving significant cost.
Downhole well and pump service — We pull the sucker rod and pump cylinder to replace leathers, check valves, and seals. This is the most common repair — and it's easy to miss because the fan keeps spinning even when the downhole pump has failed. We also service pump jack wells for livestock operations where windmills aren't in use.
Tower inspection and repair — We check the tower structure for rust, loose bolts, and stability. On older towers, we can reinforce or replace damaged sections rather than tearing down the whole structure.
Windmill relocation — When a well has gone dry or is no longer usable, we can move your existing windmill to a new well site. This includes full disassembly, transport, and reinstallation on a new tower base — saving the cost of a new unit.
How we approach windmill repair
Every windmill job is different depending on the age of the unit, what's failed, and how accessible the location is. Here's the general process.
On-site evaluation — We assess the tower condition, gearbox, fan assembly, and downhole pump components to identify what's failed and what's close to failing. Most ranchers know something's wrong but aren't sure exactly what.
Gearbox and mechanical repair — Worn gears, bearings, and brake assemblies are repaired or replaced. On older mills, we can often rebuild the gearbox rather than replace the entire head, saving significant cost.
Downhole well and pump service — We pull the sucker rod and pump cylinder to replace leathers, check valves, and seals. This is the most common repair — and it's easy to miss because the fan keeps spinning even when the downhole pump has failed. We also service pump jack wells for livestock operations where windmills aren't in use.
Tower inspection and repair — We check the tower structure for rust, loose bolts, and stability. On older towers, we can reinforce or replace damaged sections rather than tearing down the whole structure.
Windmill relocation — When a well has gone dry or is no longer usable, we can move your existing windmill to a new well site. This includes full disassembly, transport, and reinstallation on a new tower base — saving the cost of a new unit.
TRUSTED Across Kansas
TRUSTED Across Kansas
EXPERT ANSWERS
We believe in total transparency when it comes to your water systems. Whether you're curious about new well costs or the lifespan of your pump, get the straight answers you need to make an informed decision.
Is it worth repairing an old windmill or should I replace it with solar?
It depends on the condition of the tower and how much work the gearbox needs. A windmill in decent structural shape with a worn pump is absolutely worth repairing — new leathers and a sucker rod are a simple fix. If the tower is rusted through and the gearbox needs a full rebuild, the cost starts approaching a new solar system that requires almost zero maintenance. We'll give you an honest comparison.
How often does a windmill need maintenance?
Pump leathers typically need replacement every 3 to 5 years depending on water conditions and how hard the mill is working. Gearbox oil should be checked annually. Beyond that, it's mostly visual — watching for tower rust, loose bolts, and fan damage.
Can you service my windmill in a remote pasture?
Yes. We're set up for field work in locations without road access or electricity. That's most of the windmill calls we get — if the pasture had easy access, you'd probably have a power line and an electric pump instead.
EXPERT ANSWERS
We believe in total transparency when it comes to your water systems. Whether you're curious about new well costs or the lifespan of your pump, get the straight answers you need to make an informed decision.
Is it worth repairing an old windmill or should I replace it with solar?
It depends on the condition of the tower and how much work the gearbox needs. A windmill in decent structural shape with a worn pump is absolutely worth repairing — new leathers and a sucker rod are a simple fix. If the tower is rusted through and the gearbox needs a full rebuild, the cost starts approaching a new solar system that requires almost zero maintenance. We'll give you an honest comparison.
How often does a windmill need maintenance?
Pump leathers typically need replacement every 3 to 5 years depending on water conditions and how hard the mill is working. Gearbox oil should be checked annually. Beyond that, it's mostly visual — watching for tower rust, loose bolts, and fan damage.
Can you service my windmill in a remote pasture?
Yes. We're set up for field work in locations without road access or electricity. That's most of the windmill calls we get — if the pasture had easy access, you'd probably have a power line and an electric pump instead.
REQUEST YOUR ESTIMATE
Prefer to call? We're available 24/7
(785) 410-9337
208A Main st. Box 283,
WEstmoreland, ks 66549
REQUEST YOUR ESTIMATE
Prefer to call? We're available 24/7
(785) 410-9337
208A Main st. Box 283,
WEstmoreland, ks 66549
Providing reliable well repair, pump service, and custom water systems for homes, farms, and ranches across eastern Kansas since 1991.
SERVICES
Well Inspections
Well Relining Services
Submersible Pump Services
Pressure Tank Services
Windmill Services
Livestock Water Systems
QUICK LINKS
Home
About Us
Gallery
Areas Served
Contact
CONTACT & INFO
Phone: (785) 410-9337
Email: [email protected]
Available for 24/7 emergency service and rapid dispatch across Kansas.
© 2026 Flint Hills Water Solutions. All rights reserved. Terms & Service | Privacy Policy
Providing reliable well repair, pump service, and custom water systems for homes, farms, and ranches across eastern Kansas since 1991.
SERVICES
Well Inspections
Well Relining Services
Submersible Pump Services
Pressure Tank Services
Windmill Services
Livestock Water Systems
QUICK LINKS
Home
About Us
Gallery
Areas Served
Contact
CONTACT & INFO
Phone: (785) 410-9337
Email: [email protected]
Available for 24/7 emergency service and rapid dispatch across Kansas.
© 2026 Flint Hills Water Solutions. All rights reserved. Terms & Service | Privacy Policy